Sena SMH10R – Update

sodele, seit 2 Wochen besitze ich das Sena SMH10R.

Was das koppeln mit Cardo oder SRC angeht, ist es meiner Meinung nach Nepp!

Ich habe natürlich versucht es mit meinem alten SRC zu koppeln, was erstmal fehl schlug. Dann habe ich den Händler angerufen und gefragt, ob ich die Aussage aus der Produktbeschreibung falsch verstanden habe. Er bestätigte mit jedoch, daß es laut Sean funktionierten muß.

Dann habe ich den Sena-Support angeschrieben und gefragt wo der Trick ist.

Hier die Antwort:
Non-Sena
Bluetooth headsets can be connected to the Sena Bluetooth
headset if they support the Bluetooth Hands-Free Profile (HFP).

Universal Intercom Pairing
The SMH10R can be paired with non-Sena Bluetooth headsets
for Bluetooth intercom conversation. You can pair the SMH10R
with only one non-Sena Bluetooth headset; if you pair with a
different non-Sena Bluetooth headset, the previous pairing list
will be removed.
1. Turn on the SMH10R and the non-Sena Bluetooth headset you
want to pair with.
2. Press and hold the Center Button on the SMH10R for 8
seconds until the blue LED flashes rapidly. You will hear a
voice prompt, “Universal Intercom pairing”.
3. Perform the operation required for handsfree pairing on the
non-Sena Bluetooth headset (refer to the users’ manual for
the headsets you want to use). The SMH10R will automatically
pair with a non-Sena Bluetooth headset when each are in
pairing mode.

https://www.youtube.com/watch?v=X1DkC2e378s

Thanks and have a wonderful day!

Sena Technologies Inc. Support Team

Bedeutet: Das funktioniert, ja…. aber…

Da Cardo nur ein HFP-Profil besitzt, müsste man jedes gekoppelte Cardo vom jeweiligen Handy oder Navi trennen und dafür mit dem Sena koppeln, als Telefon! Aber wer will das???

Also, nur bedingt geeignet. Wäre nur was für die Sozia, die nicht telefonieren will.

Ansonsten ist die Qualität wirklich klasse! Klang, Handling (Tastendruck), alle direkt und gut.

Natürlich behalte ich es und werde es weiterhin für meinen primären Anwendungsfall nutzen (Musik und Erreichbarkeit), aber ein wenig angesäuert bin ich schon.
Hätte ich mal vorher genauer recherchiert!

 

Anleitung:

1. Das Sena in Connect-Modus bringen: ca. 10sec Mittleren Knopf, bis Ansage: Multipoint Connect

2. Cardo, in meinem Fall SRC: Einschalten, dann Ausschalten und Knopf gedrückt halten bis beide Lampen blau blinken, pairing Modus. Vorsicht: Anschliessend keine Verbindung mehr zu Handy oder Navi, da Cardo nur eine HFP-Verbindung (Hands free profile) kann!

3. die beiden Verbinden sich.

4. Feddisch

 

Tagged , .Speichere in deinen Favoriten diesen Permalink.

2 Antworten zu Sena SMH10R – Update

  1. Edgar Sponsel sagt:

    Wie kann mann diesen Modus wieder zurücksetzen ?

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert

Time limit is exhausted. Please reload CAPTCHA.

Protected by WP Anti Spam